.thumb.jpg.57313884e336fed55a647ff12ee21a88.jpg)
Информация о файле
Шасси (Main Board) CV338-t42
Panel CX420DLEDDM
eMMC KLM8G
Дамп рабочий, проверенный.
ПО USB TF-42S62T2S
После проливки дампа необходимо сделать апдейт с usb, с помощью команды cusar через консоль Mstar.
CV338 Software Upgrade
1.Prepare to software files under the root directory in USB:
One of the files is CtvUpgrade.bin,
The file is following:
2. The system is powered down (Turn off the power switch or unplug the power
plug)
3. Connect with USB to USB2.0 interface.
4. System on power (Turn on the power switch or connect to the power supply
plug )
5. After about three seconds, you can see the power indicator light flashes, which
means the upgrade is on.
If ten seconds later, there are no indicate light flashes, you need to check
Whether the USB files exit and the name is right or not. Make sure it and skip
to step2.
6. It needs about 3 minutes to complete upgrading, when the upgrade is
completed, the system will restart automatically. If the picture is standard screen
which is designed for factory automation, which means the upgrade the firmware
successfully.
7. After upgrading successfully, unplug the USB
8. You will enter the new system after powering and powering o n.
Что нового в версии 1.0.0 Просмотр изменений
Размещено
Для этой версии изменений нет.
