Информация о файле
Сервисная прошивка для поднятия шасси QM15.1E LA по USB
Что нового в версии 1.0.0 Просмотр изменений
Размещено
SOP for NVM update
1):How to choose the correct file:
1) Method A------Use panel ID
When the TV can start up normally, then you can enter factory mode(menu+1999+back) to check the panel ID, use model name and panel ID to get the correct NVM
e.g. there’s a set 40PFS5501/12, panel ID is 106, so the 2nd one is correct
model name panel ID
2) Method B------Use variant
You can get the variant from the 3rd code of serial number which is pasted on the back cover, then use model name and variant to search panel ID in the index(see attached .xlsx file), use model name and panel ID to get the correct NVM(similar to method A).
3).Method C------Use panel type
When you disassemble back cover to replace SSB or panel, you should write down panel type(you can get it from the label which is pasted on the panel), use model name and panel type to search panel ID in the index, then use model name and panel ID to get the correct NVM(similar to method A).
2): Software rename rule:
1. Rename the file to “NVM.bin”
3): Software Upgrading
1. Put renamed NVM software to USB root path, and insert USB to TV.
2. AC off -> on TV, and start upgrading.
3.TV will reboot automatically. Don’t remove power cord.
4.When TV in power on status, it will start NVM upgrading automatically.
.thumb.jpg.15e3554237ab45807faa5a84c9a5afe9.jpg)
